Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for BMW System helmet 6 EVO
Summary of Contents for BMW System helmet 6 EVO
- Page 1 BMW Motorrad The Ultimate Riding Machine Instruction Manual System helmet 6 EVO...
- Page 2 If you have questions concern- Specific instructions on ing this helmet, your authorised how to operate, control, ad- BMW Motorrad dealer will gladly just or look after items of equip- provide advice and assistance. ment on the motorcycle. We hope that you will enjoy us-...
- Page 3 The sun visor shows a trans- impact. For safety reasons, it is This BMW motorcycle helmet is parency of approx. 20 %. Only important to render a damaged designed only for motorcycling use the sun visor under optimum helmet completely unwearable.
- Page 4 System helmet 6 EVO System helmet 6 EVO Ventilation slot Visor release Vacuum ventilation Slider for sun visor Chin strap with buckle and adjuster Opening button for chin part Visor ventilation Chin part 10 Visor with anti-fog inner pane 11 Sun visor...
- Page 5 Interior Lining, head pads (remov- able) Cheek segments left/right (removable) Replacement pins and dummy plugs for inner pane (enclosed) Chin spoiler extension "Low Noise" (installed) Chin spoiler extension "Air" (enclosed)
- Page 6 System helmet 6 EVO Helmet motions when turning BMW system helmet 6 EVO can forward and backward must be be delivered from size 48/49 up Determining the helmet directly noticeable on the scalp. to size 64/65 (corresponds to size The adjustment range of the XXXS to XXXL).
- Page 7 Position chinstrap snap lock 1 and insert latching tab 2 as far as possible, until the chinstrap fits against the throat, however, at least into the first indenta- tion. Close the chin part. Make sure that the chin part engages on both sides with an audible click.
- Page 8 Adjust the length of the chin strap until the strap is seated snugly against your neck when the latching tab is fully inserted in the buckle. Should the buckle press against the larynx, the buckle position can be adjusted. Proceed analogously at the other side.
- Page 9 be removed or the enclosed "Air" extension can be added. Open the chin part 1. Align chin spoiler extension "Air" 2 to chin spoiler extension "Low Noise" on the left and right arrows and press on the Velcro elements of chin spoiler extension "Air"...
- Page 10 Visor Installing visor are increased projections by re- flection. This can cause irritation Removing visor when riding by night or in the Prerequisite: Chin part is closed rain. If this should be perceived and visor is fully open. as disturbing, it is advised not to use the inner pane.
-
Page 11: Installing Inner Visor Pane
Installing inner visor pane Sun visor Removing the sun visor Slightly lift locating tab 1 on the left and right. Clean visor 1 thoroughly. Remove sun visor 2. Slightly over-tension visor 1. Fully open visor 1. Secure inner visor pane 2 to Installing the sun visor Push slider 2 for the sun visor one of the pins arrows. - Page 12 When installing the sun vi- sor it must be observed that the sun visor is installed between outer and inner helmet shell. Check the mechanics and/ or extending and retracting the sun visor. Interior Removing the cheek/neck Pull strap 1 down between Pull neck straps 1 out of pads outer and inner helmet shell...
- Page 13 Insert welt 1 all around into the Thread neck straps 2 using a suitable tool on both sides helmet edge. through the cheek / neck Insert the pin arrow of welt 1, pads 1. Ensure that the neck which has no contact yet, into straps are not twisted.
- Page 14 Installing head pad Position head pad 3 in the hel- met and secure centre bar to the Velcro elements. Secure snap fastener 2 and locking tabs 1.
- Page 15 Your authorised BMW Motor- rad dealer can provide you with information about tested equip- ment complying with the stand- The system helmet 6 EVO can ards and released by BMW for be equipped with a wireless your BMW Motorrad system hel- communication system by your met 6 EVO.
- Page 16 Clean the visor with a soft cloth in water or with BMW helmet and a mild solution of soap Installation tool cleaner. in water or with BMW visor It is possible to use clean- cleaner.
- Page 17 ing accelerates the reactivation process of the inner visor pane. If the helmet is not used (stor- age), the visor must be opened to ensure that humidity con- tained inside can escape. A milky layer after longer stor- age periods can be easiest re- moved using a dampened fine microfibre cloth.
- Page 18 Helmet Helmet outer shell Multi-layer, glass fibre reinforced plastic (GFK), reinforcement layers in special loading zones (e.g., in the area of the sun visor) Helmet inner shell EPS (expanded polystyrene) and EPP (expanded polypropylene) with different densities for op- timum damping properties Interior Fully removable interior made of moisture-trans- porting material...
- Page 19 Sun visor Integrated, with scratch-proof surface, 100 % UVA and UVB protection Operation via slider arranged sideways on the hel- met edge Continuously adjustable Ventilation Visor ventilation via centrally arranged rocker switch Forehead and head ventilation via slide switch, ventilation via opening in the neck area...
- Page 20 ECE R 22/05 SAA/JIS standard BMW system helmet 6 EVO is These operating instructions also type-approved according to the apply for the versions of system currently applicable ECE R 22/ helmet 6 EVO, which meet the 05 standard. This standard also requirements of Australian and applies for England (UK).
- Page 21 Accessories Inner visor pane Ventilation Communication system, 13 Adjusting, 4 Installation, 8 Spare parts, 13 Visor Removal, 8 Installation, 8 Removal, 8 Care, 14 Safety instructions, 1 Cheek/ neck pads Standards Warnings, 1 Installation, 10 DOT standard, 18 Removal, 10 ECE R 22/05, 18 Chin spoiler ECE R 22/05 France, 18...
- Page 22 Printed in Germany. Depending on the scope of equipment or accessories of your product from BMW Motorrad but also in the case of country- specific versions, deviations from the details described or illustrated in this booklet may occur. No claims will be entertained as a result of such discrepancies.
- Page 23 *76018537482* Order No.: 76 01 8 537 482 01/2013, 1st edition...
Need help?
Do you have a question about the System helmet 6 EVO and is the answer not in the manual?
Questions and answers