BMW K 1600 GT Supplementary Instructions Manual page 26

Switching off audio
3
system
22
Turn off the ignition or, if the
ignition is turned on, press
the ON button.
z
Pairing, communication
system in helmet 1 with
communication system
in helmet 2
Switching on
communication system
in helmet 1
Press button 2 and hold it
down until a high-pitched con-
firmation tone sounds and
green LED 6 starts flashing.
The communication system
initialises itself; the green LED
slow-flashes.
The communication system
then goes to standby mode;
the green LED flashes as the
rate of one flash per second.
Note time limit
The next two steps
Make the communication sys-
tem visible
Searching for communication
system
are subject to a time limit of 60
seconds.
Consequently, they must be per-
formed one directly after the oth-
er.
BMW Motorrad recommends
reading through the instructions
for both steps before proceeding.