BMW K 1600 GT Supplementary Instructions Manual page 42

connection setup or complete
4
a final confirmation procedure.
38 Switching off mobile
phone 1
Switch off mobile phone 1 or
its visibility.
Switching off
communication system
in helmet 1
z
Press button 2 and hold it
down until a low-pitched con-
firmation tone sounds and red
LED 4 starts flashing.
The communication system
switches itself off; the red LED
flashes three times.
Pairing, communication
system in helmet 2 with
mobile phone 2
Switching on
communication system
in helmet 2
Press button 2 and hold it
down until a high-pitched con-
firmation tone sounds and
green LED 6 starts flashing.
The communication system
initialises itself; the green LED
slow-flashes.
The communication system
then goes to standby mode;
the green LED flashes as the
rate of one flash per second.
Switching on mobile
phone 2
Switch on mobile phone 2.
Switch on the Bluetooth func-
tions in mobile phone 2.
Note time limit
The next two steps
Make the communication sys-
tem visible
Searching for communication
system
are subject to a time limit of 60
seconds.