BMW K 1600 GT Supplementary Instructions Manual page 51

Making communication
system visible
Simultaneously press
button 2 and button 3 of the
communication system and
hold them down until green
LED 6 doubles the rate at
which it flashes (i.e. starts
flashing at 2 Hz).
The communication system
of the helmet is now visible to
other Bluetooth devices for a
maximum of 60 seconds; the
green LED flashes at a rate of
two flashes per second.
Searching for
communication system
of helmet
Switch on the navigation sys-
tem.
Open "Tools" - "Settings" -
"Bluetooth" and select the "En-
abled" option.
In the "Audio" menu, select the
"Add" option and touch "OK"
to confirm.
For 60 seconds the navigation
system searches for a visible
communication system.
The navigation system displays
the list of found Bluetooth
devices.
The communication system
is listed as a headset
identified by the designation
BMW_HELMET_II_xxxx
the string "xxxx" stands for the
ID number.
Select the communication sys-
tem and touch "OK" to con-
firm.
The navigation system con-
firms successful connection to
the helmet.
Switching off
communication system
Press button 2 and hold it
down until a low-pitched con-
firmation tone sounds and red
;
LED 4 starts flashing.
The communication system
switches itself off; the red LED
flashes three times.
5
47
z