BMW K 1600 GT Supplementary Instructions Manual page 34

Deleting pairing entries in
4
communication system in
helmet 1
30
Simultaneously press button 1
and button 2 and hold the but-
tons down.
If deletion is successful, green
z
LED 6 lights up briefly and
then starts slow-flashing to in-
dicate that the system is on
standby. A high-pitched con-
firmation tone sounds.
Note time limit
The next two steps
Make the communication sys-
tem visible
Searching for communication
system
are subject to a time limit of 60
seconds.
Consequently, they must be per-
formed one directly after the oth-
er.
BMW Motorrad recommends
reading through the instructions
for both steps before proceeding.
Making communication
system of helmet 1 visible
Simultaneously press button 2
and button 3 of helmet 1 and
hold them down until green
LED 6 doubles the rate at
which it flashes (i.e. starts
flashing at 2 Hz).
The communication system
of the helmet is now visible to
other Bluetooth devices for a
maximum of 60 seconds; the
green LED flashes at a rate of
two flashes per second.