Foreword Thanks for purchasing Comica EJoy D10 Main Features · Cardioid Polar Pattern, Anti-noise Large Diaphragm Dynamic Mic · XLR/USB-C Digital/Analog Outputs, Wide Compatibility ® · 48kHz/24bit Recording, Built-in Sound Card, One-key Calmix Denoise · Support 4-level Gain Control and Step-less Monitoring Volume Adjustment ·...
Page 4
If the input sound is too loud when connected to the computer, users can adjust the computer's "Microphone Properties-Levels" to reduce the gain(Take the Windows system as an example) Sound Microphone Properties Playback Recording Sounds Communications General Listen Levels Advanced Select a recording device below to modify its settings: Microphone Microphone...
Packing List EJoy D10(A) Microphone*1 2 in 1 Audio Cable *1 Boom Arm*1 EJoy D10 RGB Cardioid Dynamic Microphone User Manual Touch Fastener*5 User Manual*1 Warranty Card*1 EJoy D10(D) Microphone*1 2 in 1 Audio Cable *1 Desktop Mic Stand*1 EJoy D10...
Page 6
Components and Instruction Microphone: Dynamic Mic Capsule Microphone Sponge RGB Light Denoise Button Status Indicator Light Monitoring Volume Knob/ Muting Button EQ E ect Indicator Light Gain Adjustment Switch EQ E ect Button RGB Light Button 3.5mm Headphone USB-C Port Monitoring Port XLR Port...
Page 7
1. Dynamic Mic Capsule 2. Microphone Sponge 3. RGB Light Audio dynamic/comica orange/ sea wave/colorful breathing light/RGB slow wave/rotating rainbow six RGB light e ects; Red light keeps on during muting status 4. Denoise Button Short press to turn denoise on/o 5.
Page 8
10. RGB Light Button Long press to turn light e ect on/o ; short press to switch six light e ects 11. 3.5mm Headphone Monitoring Port Plug in 3.5mm TRS/TRRS headphone for real-time monitoring 12. USB-C Port Connect to devices for digtal audio output via the 2 in 1 audio cable 13.
Page 9
Installation and Usage Boom Arm Kit Installation: 1.Clamp the stand base of boom arm to the desktop, tighten the screw on the bottom clockwise 2. Insert the boom arm into the base socket, fix and adjust it by the screws on the side of the base...
Page 10
3. Connect the mic threaded hole to the boom arm's screw, rotate clockwise to fasten 4. Adjust and fix the mic through the locking knob on boom arm...
Page 11
Desktop Stand Kit Installation: 1. Connect the threaded hole of mic to the screw of the desktop mic stand, rotate clockwise to fasten 2. Adjust the angle of mic through the locking knob on it...
Usage: 1.Digital Output Connect the mic to smartphone/computer through 2 in 1 audio cable, choose whether to monitor according to your needs Adapter Adapter Cable 1. Please purchase a USB C-Lightning adapter/cable that supports OTG function when connected with lightning port devices 2.
2.Analog Output Connect the mic to audio interface/recorder/mixer via the XLR-XLR or XLR-3.5mm TRS audio cable 1. When outputting analog audio through the XLR port, all other functions are unavailable except for the dynamic audio signal delivery (Such as status indicator light, EQ e ect, gain adjustment, RGB light e ect, real-time monitoring, etc.) 2.
Specifications Type Dynamic Directivity Cardioid -56dB re 1V/Pa(1.6mV @ 94dB SPL) ±2dB Microphone Sensitivity @ 1kHz Frequency Range 55Hz ~ 16kHz Maximum SPL 128dB (@ 1% THD) Signal / Noise 72dB SPL(A-weighted,as per IEC651) Equivalent Noise 22dB SPL(A-weighted,as per IEC651) Dynamic Range 106dB SPL(A-weighted,as per IEC651) Sampling Rate...
Need help?
Do you have a question about the EJoy D10 and is the answer not in the manual?
Questions and answers