Vertical Mode - Tektronix 2337 Instruction Manual

control is out of calibrated detent (vertical deflection
VERTICAL MODE Switches—Five push-button
switches that select the mode of operation for the
display.
for display.
the Channel 2 input connector.
CH 2 INVERT Switch—Inverts Channel 2 display
when button is pressed in. Push button must be
pressed in a second time to release it and regain a
noninverted display.
1) Position Controls—Determine the vertical position
of the displays on the crt. When X-Y VERTICAL
zontal POSITION control moves the display hori-