Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Moxa Technologies EXPC-F2000W Series
Summary of Contents for Moxa Technologies EXPC-F2000W Series
- Page 1 EXPC-F2000W Series Quick Installation Guide Flat-panel fanless industrial computers with Zone-2 certifications Version 1.1, June 2024 Technical Support Contact Information www.moxa.com/support 2024 Moxa Inc. All rights reserved. P/N: 1802020004011 *1802020004011*...
-
Page 2: Package Checklist
Overview The EXPC-F2000W family consists of 12.1-inch and 15.6-inch panel computers with 11th Gen Intel Core™ i processor to deliver a reliable, durable, and versatile platform for use in industrial, non-hazardous, and mission-critical environments. The EXPC-F2000W panel computers come with a rich set of IO interfaces to satisfy most industrial application scenarios. -
Page 3: Panel Views
Panel Views Front Panel EXPC-F2150W Series EXPC-F2120W Series - 3 -... -
Page 4: Bottom Panel
Bottom Panel AC Models DC Models - 4 -... - Page 5 Dimensions EXPC-F2150W Series EXPC-F2120W Series - 5 -...
- Page 6 Touch-panel Buttons and LEDs The panel computers should be powered ON and functioning properly before the touch-panel buttons can be activated. To protect the touch- panel buttons against accidental activation, the buttons only get activated when they are pressed twice. Pressing a button for the first time activates the touch-panel area (the LED lights on the three buttons light up) and pressing it for the second time activates the function associated with the button.
- Page 7 Button/LED LED Status Function Description Auto Mode 1: Increase LED (White): When the Light sensor is enabled and Brightness system is powered on will automatically detect the (S0 state), touching ambient light sources to the keypad button will adjust the LCD brightness. light up both the Auto Mode 2: Increase Brightness...
-
Page 8: Panel Mounting
Installing the Panel Computer NOTE To ensure a secure and safe installation, we highly recommend that the mounting of the computer is done by a skilled person experienced in installing such devices. Panel Mounting A panel-mounting kit is included in the package of the EXPC-F2000W panel computers, which comes with 10 mounting clamps for EXPC- F2120W and 13 mounting clamps for EXPC-F2150W. - Page 9 To install the mounting clamps: Use short M4 SUS stainless-steel screws (included in the panel-mounting kit) to fasten the clamp arms to the EXPC- F2000W mounting slots, as shown in the diagram below. Use clamps to fasten the computer to its mounting point. Ensure that the torque value does not exceed 5 kgf.
-
Page 10: Vesa Mounting (Optional)
VESA Mounting (optional) You can use an optional VESA-mounting kit to install the EXPC-F2000W. Refer to the following figures for the VESA mounting dimensions for the EXPC-F2000W panel computers and attach the bracket on the rear of the computer. Use a torque value of not more than 5.5 kgf-cm for the screws (M4x10 mm SUS). -
Page 11: Connector Descriptions
Connector Descriptions AC/DC Power Input The EXPC-F2000W family consists of both AC and DC models. Power input sockets are located on the bottom panel of the computers. AC Models DC Models When using AC power, first ensure that you connect the AC power cord to a socket-outlet with earthing connection and use a standard C16 AC inlet along with a C15 plug (refer to the figure in the Powering On/Off the EXPC-F2000W section). -
Page 12: Ethernet Ports
A terminal block is available in the accessories package. The required wire size is 12 to 14 AWG (Wire Type: Cu, Field Wiring: 2) and a torque value 0.5 N-m (4.5 lb-in) should be applied. The input terminal block should be wired and installed by a skilled person. The wire size of the power input and the earthing conductor should be 12 AWG (3.33mm²). -
Page 13: Audio Interface
Extending the Display The EXPC-F2000W Series comes with both standard VGA (DB15) and DisplayPort interfaces (located on the bottom of the shell) for simultaneously extension of the display to two monitors. Installing Additional Storage... - Page 14 Installing an SSD Card If you want to install or replace the SSD, follow these steps: 1. Unfasten the seven screws on the back panel of the computer. Remove the back-panel board and then remove the ten screws that are exposed. 3.
- Page 15 4. If an SSD is already installed, unfasten the screw on the end and remove the SSD. 5. Insert an SSD card into the socket or replace the existing one. 6. Push the SSD card in place and secure it by fastening the screw on the socket.
-
Page 16: Real-Time Clock
To install a CFexpress card, do the following: 1. Loosen the screws on the CFexpress slot cover. 2. Slide the cover to access the slot and insert the CFexpress card into the slot and push it all the way into the slot. To remove the card, you need to push the card in to release the card. - Page 17 Powering the EXPC-F2000W To power on the panel computer, you can either supply the power by connecting the Terminal Block to Power Jack Converter to the terminal block and then connecting a power adapter or connect the computer to an AC power source using the power cord. After the power source is connected, the EXPC-F2000W will boot automatically.
-
Page 18: Grounding The Device
Grounding the Device Proper grounding and wire routing help to limit the effects of noise from electromagnetic interference (EMI). Run the ground connection from the ground screw to the grounding surface prior to connecting the power source. For DC models, run a connection from the functional earthing screw (M6) to the grounding surface. - Page 19 Hazardous Location Specifications Trademark Model Input Rating Model/Ratings EXPC-F2150W-TL7-AC, 100-240 VAC, 50-60 Hz or EXPC-F2150W-TL5-AC, 50/60 Hz, 1.0 A (max.) EXPC-F2150W-TL3-AC, EXPC-F2150W-TL1-AC, EXPC-F2150W (CTO), EXPC-F2120W-TL7-AC, EXPC-F2120W-TL5-AC, EXPC-F2120W-TL3-AC, EXPC-F2120W-TL1-AC, EXPC-F2120W (CTO) EXPC-F2150W-TL7-DC, 9-36 VDC, 11A (max.) EXPC-F2150W-TL5-DC, EXPC-F2150W-TL3-DC, EXPC-F2150W-TL1-DC, EXPC-F2150W (CTO), EXPC-F2120W-TL7-DC, EXPC-F2120W-TL5-DC, EXPC-F2120W-TL3-DC,...
-
Page 20: Specific Conditions Of Use
Specific Conditions of Use All front surfaces have been evaluated to the enclosure • requirements for Ingress Protection at IP64 in accordance with IEC/EN 60079-0. The equipment shall only be used in an area with a pollution degree • of 2 or lower, as defined in IEC/EN 60664-1. For AC models, transient protection shall be provided and set at a •... - Page 21 ATTENTION EXPLOSION HAZARD Do not remove or replace the CF express card while the circuit is live unless the area is free of ignitable concentrations. AVERTISSEMENT RISQUE D'EXPLOSION CFexpress carte: Ne pas la retirer ou la remplacer lorsque le produit est sous tension ou à moins que la zone ne soit exempte de concentrations inflammables.
Need help?
Do you have a question about the EXPC-F2000W Series and is the answer not in the manual?
Questions and answers