Product Safety; Incoming Acceptance; Product Identification - Endress+Hauser Micropilot FMR60B Brief Operating Instructions

Product safety

7 Product safety
This measuring device is designed in accordance with good engineering practice to meet state-
of-the-art safety requirements, has been tested, and left the factory in a condition in which it
is safe to operate.
It meets general safety standards and legal requirements. It also complies with the EU
directives listed in the device-specific EU Declaration of Conformity. The manufacturer
confirms this by affixing the CE mark to the device.
8

Incoming acceptance

Check the following during incoming acceptance:
• Is the order code on the delivery note identical to the order code on the product sticker?
• Are the goods undamaged?
• Do the data on the nameplate correspond to the order specifications and the delivery note?
• Is the documentation provided?
• If required (see nameplate), are the Safety Instructions (XA) provided?
If one of these conditions is not met, please contact the manufacturer' s sales office.
9

Product identification

The following options are available for identification of the device:
• Nameplate specifications
• Extended order code with breakdown of the device features on the delivery note
‣
Device Viewer(www.endress.com/deviceviewer); manually enter the serial number from
the nameplate.
 All the information about the measuring device is displayed.
‣
Endress+Hauser Operations app; manually enter the serial number indicated on the
nameplate or scan the 2D matrix code on the nameplate.
 All the information about the measuring device is displayed.
9.1 Nameplate
Do you have the correct device?
The nameplate provides you with the following information on the device:
• Manufacturer identification, device designation
• Order code
• Extended order code
• Serial number
• Tag name (TAG) (optional)
6
Micropilot FMR60B HART
Endress+Hauser