Endress+Hauser Micropilot FMR60B Brief Operating Instructions page 5

Micropilot FMR60B HART
Incorrect use
The manufacturer is not liable for damage caused by improper or non-intended use.
Avoid mechanical damage:
‣
Do not touch or clean device surfaces with pointed or hard objects.
Clarification of borderline cases:
‣
For special fluids and fluids for cleaning, Endress+Hauser is glad to provide assistance in
verifying the corrosion resistance of fluid-wetted materials, but does not accept any
warranty or liability.
Residual risks
Due to heat transfer from the process as well as power loss in the electronics, the temperature
of the electronics housing and the assemblies it contains (e.g. display module, main
electronics module and I/O electronics module) may rise to 80 °C (176 °F). When in operation,
the sensor can reach a temperature close to the medium temperature.
Danger of burns from contact with surfaces!
‣
In the event of elevated fluid temperatures, ensure protection against contact to prevent
burns.
5 Workplace safety
When working on and with the device:
‣
Wear the required personal protective equipment as per national regulations.
6 Operational safety
Damage to the device!
‣
Operate the device in proper technical condition and fail-safe condition only.
‣
The operator is responsible for the interference-free operation of the device.
Modifications to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable
dangers!
‣
If modifications are nevertheless required, consult with the manufacturer.
Repair
To ensure continued operational safety and reliability:
‣
Carry out repairs on the device only if they are expressly permitted.
‣
Observe federal/national regulations pertaining to the repair of an electrical device.
‣
Use only original spare parts and accessories.
Endress+Hauser
Workplace safety
5