Danfoss IK2 User Manual page 13

User Manual
Remote Control IK2 Transmitters
Charger and battery
Charger and battery
BC70K and BT11K specifications
BC70K Battery Charger Set-up
©
Danfoss | February 2025
Disposal note:
This symbol on the product indicates that it may not be disposed of as household waste.
It must be handed over to the applicable take-back scheme for the recycling of electrical equipment.
•
Dispose of the product through channels provided for this purpose.
•
Comply with all local and currently applicable laws and regulations.
BC70K battery charger
Specification
AC power supply
DC power supply, nominal
BT11K battery
Specification
Voltage
Capacity
Charging temperature
Discharge temperature
Charging mode
Weight
The battery charger has two charging compartments that can simultaneously charge two BT11K
batteries. Use the information below to set up the BC70K battery charger.
Value
110 – 230 V, 50/60 Hz, ± 10%, automatic switching
12 – 24 V
Value
3.7 V
1130 mAh Li-Ion
0°C to 45°C
-20°C to 60°C
Fast (<2.5 h) and intelligent
23 g
BC290862531428en-000301 | 13