18
Setting Up
To remove the computer stand:
Turn the computer over so that the stand is at the top.
1
Loosen the thumbscrew and lift the stand away.
2
Place the computer in a horizontal position.
3
See the documentation that came with the printer for any recommended
preparation procedures, such as:
•
Removing the packaging
•
Installing the toner or ink cartridge
•
Loading paper
Then follow the instructions that came with the printer to connect it to the
computer. If no information is provided, see the following sections.
Parallel Printer
Turn off the computer (see page 22).
1
NOTICE:
Use only a standard IEEE parallel cable measuring 3 m (10 ft) or
less to connect the printer to the computer. Use of a nonstandard cable may
prevent the printer from working.