Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Measuretek Manuals
  4. Scales
  5. SS60
  6. User manual

Measuretek SS60 User Manual

Hide thumbs Also See for SS60:

Advertisement

Quick Links

Download this manual
w w w . e a s t h i g h . c o m . c n
SS60
12R970D
User/Technical Manual
Contents subject to change without notice
Version 04.20
01/2019

Advertisement

loading
Need help?

Need help?

Do you have a question about the SS60 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Measuretek SS60

Summary of Contents for Measuretek SS60

  • Page 1 . e a s t h i g h . c o m . c n SS60 12R970D User/Technical Manual Contents subject to change without notice Version 04.20 01/2019...

  • Page 2: Table Of Contents

    Accumulation Mode ........................... 20 Counting Mode ............................21 Check Counts (counts compare) in Counting mode ....................22 Percent Weighing Mode (closed on SS60) ......................23 Check Percent (percentage compare) in Percent weighing mode ................24 BMI Working Mode (closed on SS60) ......................25 Weight Fine-tune (closed on SS60) ........................

  • Page 3: Introduction Introduction

    Avoid using in heavy vibration or heavy airflow conditions. This also applies when the floor scale is integrated into conveying systems. SS60 www.easthigh.com.cn...

  • Page 4: Specifications

    Specifications Specifications Specifications Specifications 12R970 12R970 12R970 12R970 Model Model Model Model SS60 SS60 SS60 SS60 Max Capacity Max Capacity 150lb (60kg) Max Capacity Max Capacity Readability Readability Readability Readability 0.05lb (0.02kg) Display Resolution Display Resolution 1:3000 Display Resolution Display Resolution...

  • Page 5: Installation Installation

    S/S platform. The SS60 indicator and platform are NTEP certified, making the scale The SS60 indicator and platform are NTEP certified, making the scale capable The SS60 indicator and platform are NTEP certified, making the scale The SS60 indicator and platform are NTEP certified, making the scale...

  • Page 6: Overview Of Controls And Functions Overview Of Controls And Functions

    3. 3. 3. 3. OVERVIEW OF CONTROLS AND FUNCTIONS OVERVIEW OF CONTROLS AND FUNCTIONS OVERVIEW OF CONTROLS AND FUNCTIONS OVERVIEW OF CONTROLS AND FUNCTIONS Indicator Display Character Definitions Indicator Display Character Definitions Indicator Display Character Definitions Indicator Display Character Definitions SS60 www.easthigh.com.cn...

  • Page 7: Indicator Display

    (The model 12R970 is NTEP certified, so part of the functions are closed, and the corresponding announciator will not be displayed as well.) announciator will not be displayed as well.) announciator will not be displayed as well.) announciator will not be displayed as well.) SS60 www.easthigh.com.cn...

  • Page 8: Function Keys

    Input data mode Ignores the modification Menu selection mode Exits from current working mode Note: Note: Note: Note: Normally, the second function of a key needs to be pressed down for more than 3 seconds to get activated. SS60 www.easthigh.com.cn...

  • Page 9: Operation Menu Structure Operation Menu Structure

    USA,CANADA, EUROPE The division number under primary unit, if (REGULAR)≠none, the max is 10,000 The division value under primary unit; the division value under second unit is automatically determined by indicator according to the division value under primary unit. SS60 www.easthigh.com.cn...
  • Page 10 % % % % CAL.ZRO CAL.ZRO CAL.ZRO CAL.ZRO= calibration zero; ( ( ( ( & & ) ) ) ) & & LAST.Z.T LAST.Z.T LAST.Z.T LAST.Z.T=switch-off zero and tare % % % % If (REGULAR)≠none, the value is fixed on WEIGHT SS60 www.easthigh.com.cn...
  • Page 11 NO NO NO NO=disable; 100% 100% 100% 100%=enable and display format is 100% ; 100.0% 100.0% 100.0% 100.0%=enable and display format is 100.0%; 100.00% 100.00%=enable and display format is 100.00%; 100.00% 100.00% Yes/No Yes/No Yes/No Yes/No=enable/disable BMI function, SS60 www.easthigh.com.cn...
  • Page 12 CONFIG settings should only be performed by individuals with the required technical CONFIG settings should only be performed by individuals with the required technical CONFIG settings should only be performed by individuals with the required technical knowledge. knowledge. knowledge. knowledge. SS60 www.easthigh.com.cn...

  • Page 13: User Submenu

    Yes/No Yes/No=enable/disable output gross weight. Prompt is “GROSS” Yes/No Yes/No Yes/No Yes/No=enable/disable output tare weight. Prompt is “TARE” Yes/No Yes/No Yes/No Yes/No=enable/disable output net weight. Prompt is “NET” Yes/No Yes/No=enable/disable output weight percentage. Prompt is Yes/No Yes/No “PERCENTAGE” SS60 www.easthigh.com.cn...
  • Page 14 CMD=output after a request command is received; PRT.CMD PRT.CMD= output after PRINT key pressed or request PRT.CMD PRT.CMD command received; STABLE STABLE=output after scale is stable; STABLE STABLE Note: use PRINT or CMD to output data, the scale must be stable. SS60 www.easthigh.com.cn...
  • Page 15 Yes/No “STATUS” How many blank lines after strings output: NONE NONE=no blank line,; NONE NONE LINE1/2/3/4 LINE1/2/3/4=there're 1, 2,3 or 4 blank lines after strings, LINE1/2/3/4 LINE1/2/3/4 used for paper feed forward 1/2/3/4 lines. " " " " SS60 www.easthigh.com.cn...
  • Page 16 1-255=the range of weight is 1 1 1 1 - - - - 255 255d; when current weight is less than this value, the scale can be regarded as empty , or $ $ $ $ the load on scale is removed. It must be bigger than (CONFI.MOTION). SS60 www.easthigh.com.cn...
  • Page 17 LCD contraction level contraction level contraction level contraction level selection 8 8 8 8 scale's ID number: 000000 000000 000000 000000- - - - 999999 999999 999999 999999 " ( " ( " ( " ( ****** ****** ****** ****** SS60 www.easthigh.com.cn...

  • Page 18: Cal Submenu

    Input Gravity of User Location by keyboard # # # # * ***** * ***** * ***** * ***** Input or view calibration parameters value Calibration end and restart NOTE: NOTE: NOTE: NOTE: For more details, please refer to section “6.CALIBRATION” “6.CALIBRATION” “6.CALIBRATION” “6.CALIBRATION” SS60 www.easthigh.com.cn...

  • Page 19: Misc Submenu

    Test COM1 receiving; for more details refer to section8 Test COM1 transmitting; for more details refer to section8 Test COM2 receiving; for more details refer to section8 Test COM2 transmitting; for more details refer to section8 Test keys and buzzer; for more details refer to section8 SS60 www.easthigh.com.cn...

  • Page 20: Operations Operations

    0.05kg 0.05kg 0.05kg 0.05kg 0.1 lb 0.5kg 0.5kg 0.5kg 0.5kg 0.5kg 500g 1 lb 20oz Not available Not available 10 lb Not available Not available 50kg 50kg 50kg 50kg 50kg Not available Not available Not available Not available SS60 www.easthigh.com.cn...

  • Page 21: Zero

    1. Zero the scale as described above. 2. Press and hold the TARE/PRESET TARE/PRESET key until “ “ “ “ ” is displayed, then the tare weight will TARE/PRESET TARE/PRESET be displayed. The first digit and NET NET will flash in the display. SS60 www.easthigh.com.cn...

  • Page 22: Check Weighing (Data Compare) In Normal Weighing Mode

    Accumulation Mode Accumulation Mode The accumulation function allows storage of weighed values and the summation of those values. This function can accumulate weights, piece counts, and percentages in normal weighing mode, counting mode, and percent weighing mode respectively. SS60 www.easthigh.com.cn...

  • Page 23: Counting Mode

    Note Note: At any time you can press ZERO/ON/OFF Note Note ZERO/ON/OFF ZERO/ON/OFF to exit “Input Piece Weight” and return ZERO/ON/OFF to counting mode. ii. When is shown, use the keys to select the piece weight unit of SS60 www.easthigh.com.cn...

  • Page 24: Check Counts (Counts Compare) In Counting Mode

    The Check Counts function allows the user to input a pre-set range, and the display will indicate whether the weighed value is within that range, or indicate if it is too high or too low. 1. Press and hold the UNIT/DATA UNIT/DATA UNIT/DATA UNIT/DATAkey for 4 seconds to input the comparative data range. SS60 www.easthigh.com.cn...

  • Page 25: Percent Weighing Mode(Closed On Ss60)

    Audible beep parameters can be changed from their defaults in User Setup User Setup User Setup mode. User Setup Percent Weighing Mode(closed on SS60) Percent Weighing Mode(closed on SS60) Percent Weighing Mode(closed on SS60) Percent Weighing Mode(closed on SS60) In this mode, the scale will weigh the unit on the platform, calculate and display its percentage after the unit-percentage-weight of goods is obtained.

  • Page 26: Check Percent (Percentage Compare) In Percent Weighing Mode

    1. In percent weighing mode, press the UNIT/DATA UNIT/DATA UNIT/DATA UNIT/DATA key for more than 4 seconds to input compare data of high and low. 2. After is displayed, will then be displayed, use key to input high SS60 www.easthigh.com.cn...

  • Page 27: Bmi Working Mode (Closed On Ss60)

    Yes. Weight Fine Weight Fine Weight Fine Weight Fine- - - - tune (closed on SS60) tune (closed on SS60) tune (closed on SS60) tune (closed on SS60) With this function, the user can adjust the displayed weight (to a minimal extent) with no need for standard weight.

  • Page 28: Hold Function (Closed On Ss60)

    SETUP TARE/PRESET TARE/PRESET to confirm and exit to normal weighing mode. TARE/PRESET TARE/PRESET HOLD Function (closed on SS60) HOLD Function (closed on SS60) HOLD Function (closed on SS60) HOLD Function (closed on SS60) NOTE NOTE: In trade application, HOLD function should be prohibited!
  • Page 29 HOLD- - - - HLD.TIM HOLD HLD.TIM HLD.TIM. HLD.TIM If the time of scale variation is over USER USER- - - - OTHER OTHER- - - - NLD.RNG NLD.RNG or is more than USER USER OTHER OTHER NLD.RNG NLD.RNG SS60 www.easthigh.com.cn...

  • Page 30: Details About Serial Communication

    The bit definition of H The bit definition of H H H H H H H H H H H H H : : : : 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 SS60 www.easthigh.com.cn...
  • Page 31 If TARE function cannot be activated, it will return to current scale status. Command: U<CR> U<CR> (55h 0dh) U<CR> U<CR> Response: Changes units of measure (simulate UNIT UNIT UNIT UNIT key) and return scale status with new units, SS60 www.easthigh.com.cn...
  • Page 32 OUT1/2- - - - xxxx xxxx USER USER OUT1/2 OUT1/2 xxxx xxxx <LF><Prompt>H <CR> --- USER USER USER USER- - - - OUT1/2 OUT1/2 OUT1/2 OUT1/2- - - - STATUS STATUS STATUS is set to YES STATUS …… …… …… …… <LF> SS60 www.easthigh.com.cn...
  • Page 33 COM1/2 COM1/2 LAYOUT LAYOUT $ $ $ $ a. This protocol of serial communication is similar to the TOLEDO PS60 TOLEDO PS60 protocol. The baud rate and TOLEDO PS60 TOLEDO PS60 data format is set by User menu. SS60 www.easthigh.com.cn...
  • Page 34 1 = Over capacity 1= Not at zero 0 = Not over capacity 0=RAM error 1 = ROM error 1= RAM okay 0 = ROM okay 0= EEPROM error 1 = Faulty calibration 1= EEPROM okay 0 = Calibration okay SS60 www.easthigh.com.cn...
  • Page 35 If your indicator is needed to work with UPS worldship, please try following settings: If your indicator is needed to work with UPS worldship, please try following settings: (1) USER-COM1(or 2)-BAUD.RT=4800 (2) USER-COM1(or 2)-BYT.FMT=7E1 (3) USER-COM1(or 2)-LAYOUT=SCP-12 (4) Set scale port to NCI3835 in UPS worldship. SS60 www.easthigh.com.cn...

  • Page 36: Calibration Calibration

    Before entering this value, you can press and hold the UNIT/DATA UNIT/DATA key to change the unit of measure to kg or lb. Press the TARE/PRESET UNIT/DATA UNIT/DATA TARE/PRESET TARE/PRESETkey to TARE/PRESET confirm, then the indicator will flash the input standard weight. When this weight number SS60 www.easthigh.com.cn...
  • Page 37 Changing the geographical setting alters the calibration values !!! Input Calibration Input Calibration Input Calibration Input Calibration 7. When is selected, press TARE/PRESET TARE/PRESET TARE/PRESET TARE/PRESET key to confirm to enter Input calibration, to view SS60 www.easthigh.com.cn...
  • Page 38 8. After the indicator receives all the necessary data, it will calculate and store all calibration parameters into EEPROM, and after finishing the calibration it will display . Then, it will 3 3 3 3 re-start and return to original mode. SS60 www.easthigh.com.cn...
  • Page 39 SS60 www.easthigh.com.cn...

  • Page 40: Misc

    SETUP SETUP key to go to item, press TARE/PRESET TARE/PRESET to enter this mode and TARE/PRESET TARE/PRESET display battery voltage. 2. If the voltage is not correct, refer to the following steps to calibrate the voltage: SS60 www.easthigh.com.cn...

  • Page 41: View Or Set Date

    CONFIG key to select # # # # item, then press TARE/PRESET TARE/PRESET TARE/PRESET TARE/PRESET to display current Version. 2. Firmware Version display Format is: # # # # xx.yy, xx is hardware version, yy is software version. SS60 www.easthigh.com.cn...

  • Page 42: Tes Test T T T

    Keyboard and Buzzer Test Keyboard and Buzzer Test Keyboard and Buzzer Test Keyboard and Buzzer Test 1. Press and hold the SETUP SETUP SETUP key for more than 4 seconds to enter SETUP SETUP SETUP SETUP SETUP mode, using SS60 www.easthigh.com.cn...

  • Page 43: Connectors And Jumpers Connectors And Jumpers

    PIN # PIN # PIN # PIN # DEFINITION DEFINITION DEFINITION DEFINITION IN/OUT/POWER IN/OUT/POWER IN/OUT/POWER IN/OUT/POWER ELECTRICAL LEVEL ELECTRICAL LEVEL ELECTRICAL LEVEL ELECTRICAL LEVEL Adapter input voltage + Power input 6.5Vdc(6-9Vdc,≥0.5A) Adapter input voltage – (GND) Power ground 0Vdc SS60 www.easthigh.com.cn...
  • Page 44 Calibration enabled Calibration disabled 7. JP1 Jumper: CONNECTED PINS CONNECTED PINS CONNECTED PINS CONNECTED PINS FUNCTION FUNCTION FUNCTION FUNCTION Two shorter on pin1-2: 4 wires load cell is used Two shorter on pin2-3: 6 wires load cell is used SS60 www.easthigh.com.cn...

  • Page 45: Definitions Definitions

    & & & & - Sample goods weight to calculate piece weight - Input pieces number of weighted goods - Sample goods weight to calculate unit percent weight - Input percentage of weighted goods - Accumulation times is xxx SS60 www.easthigh.com.cn...

  • Page 46: Hooting

    Remove load on scale. 1. Load on scale exceeds allowable limits. Wait for load to become stable. then （2%FS） Cannot zero the display press the ZERO/ON/OFF ZERO/ON/OFF ZERO/ON/OFF key to zero the ZERO/ON/OFF 2. Load on the scale is unstable display SS60 www.easthigh.com.cn...

  • Page 47: Replacement Parts Replacement Parts

    MeasureTek’s liability under this warranty is limited to the repair or replacement of the defective product and in no event shall MeasureTek be liable for consequential or indirect damages.

This manual is also suitable for:

12r970d