True Fitness 8100465 Assembly Instructions

Apex cross trainer side step accessory

Download this manual

APEX CROSS TRAINER

SIDE STEP ACCESSORY

ASSEMBLY INSTRUCTIONS

IMPORTANT—READ CAREFULLY

FOR IMPORTANT SAFETY INFORMATION AND DOWNLOAD OF

THE COMPLETE OWNER'S MANUAL AND ASSEMBLY GUIDE SEE

TRUEFITNESS.COM OR SCAN THE QR CODE ABOVE FOR DIRECT ACCESS

IF YOU NEED IMMEDIATE ASSISTANCE PRE OR POST ASSEMBLY

CONTACT OUR SUPPORT TEAM MONDAY–FRIDAY 8:30AM–5:00PM (CST)

800.883.8783 | SERVICE@TRUEFITNESS.COM

MODEL 8100465

MANUAL 8100616 REV01

Need help?

Do you have a question about the 8100465 and is the answer not in the manual?

Page 1 THE COMPLETE OWNER’S MANUAL AND ASSEMBLY GUIDE SEE TRUEFITNESS.COM OR SCAN THE QR CODE ABOVE FOR DIRECT ACCESS IF YOU NEED IMMEDIATE ASSISTANCE PRE OR POST ASSEMBLY CONTACT OUR SUPPORT TEAM MONDAY–FRIDAY 8:30AM–5:00PM (CST) 800.883.8783 | SERVICE@TRUEFITNESS.COM MODEL 8100465 MANUAL 8100616 REV01...
Page 2 ASSEMBLY INSTRUCTIONS NOTE: Supplemental video available @TRUEFitnessservicevids: https://www.youtube.com/playlist?list=PLr3Igv32UrupfqchaypIG13susf3wJ-k_ PREASSEMBLY CHECKLIST VERIFY BOX CONTENTS IMPORTANT! Please verify box contents. If you have questions, or if there are any missing parts, contact product support (service@trueﬁ tness.com | 800.883.8783). TOOLS NEEDED FOR INCLUDED ASSEMBLY IN BOX #2 Phillips...
Page 3 ASSEMBLY STEPS A. On each side of the machine, using a #2 Phillips screwdriver, remove the rear plastic covers. B. On each side of the machine, place the side step over the rear frame. C. Using a 5mm and 6mm allen wrench, fasten each side step in place using one bolt and three socket head cap screws and washers.