ABOUT THIS MANUAL
The RTO 710A Service Manual, which is contained in two volumes, provides information to
Section 1 - Theory of Operations contains a block diagram and detailed circuit description for
: "Section 2 - Diagnostics contains detailed descriptions for the diagnostic routines contained in
_sithe RTD 710A Firmware and how to use them.
' Section 3 - Maintenance contains four major subsections. Static-Sensitive Components contains
"information about handling and servicing static-sensitive components. Preventive Maintenance provides
information about inspecting, cleaning, and calibrating the instrument, Troubleshooting and Repair
provides information about replacement parts, and describes what tools (software, hardware, and
documentation) are available for troubleshooting and repairing the instrument. Removal and Re-
placement Procedures contains instructions for removing and reinstalling all circuit boards in the in
instrument.
Section 4 - Performance Check/Adjustment Procedures contains a list of test equipment and
the procedures required to perform check and/or adjust the instrument.
Section 5 - Replaceable Electrical Parts contains a list of ail electronic parts in the instrument.
Section 6 - Test Point and Adjustment Locations contains an. illustration showing the location
of the test points and adjustable components for each circuit board adjusted during calibration.
Section 7 - Troubleshooting Charts contains flow charts that can be used with the internal
diagnostics to isolate an instrument problem.
Section 8 - Diagrams and Circuit Board Illustrations contains schematic diagrams and circuit
board illustrations for each printed circuit board in the insirument.
Section 9 - Replaceabie Mechanicai Parts contains exploded view illustrations and parts lists
for the mechanical paris and assemblies in the instrument.
ii
RTD 710A Service Manual
Need help?
Do you have a question about the RTD 710A and is the answer not in the manual?