NEC VERSA VX Manual page 53

Option
CPU Speed Control
Hard Disk Timeout
Video Timeout
Peripheral Timeout
Audio Device
Timeout
Standby Timeout
Auto Suspend
Timeout
LCD Suspend — Allows you to suspend the system when the LCD panel is closed.
!
Suspend Option — Specifies either Suspend or Save to File (STF) as the default
!
power management mode. For details about using this parameter, see the section,
"Managing System Power," later in this chapter.
Automatic STF — Enables the system, after 30 minutes in Suspend mode, to save
!
the current working environment to a special file on the hard disk and to power
down the system.
If Auto Save to File is set to Off and the save-to-file area is present on your hard
drive, pressing the
File mode. For details about using this parameter, see the section, "Managing
System Power," later in this chapter. For details about creating the save-to-file area,
see the section, "HDPREPEZ Utility," in Chapter 4.
Panel Brightness — Selects the LCD screen brightness.
!
Suspend Warning Tone — Specifies whether the system warning tone sounds when
!
Suspend mode starts. It is best to keep this option enabled.
Wake Up from Suspend Alarm/Resume Alarm Time — Allows the alarm to wake
!
up the system from Suspend. Designates the time parameter in five minutes
increments.
Custom Timeout Options
Definition
Sets CPU performance at one of four levels.
Sets the time delay before your hard disk powers
down.
Sets whether to timeout the video or not.
Sets whether to timeout the peripheral or not.
Sets the time delay before your audio device powers
off.
Selects the system standby timeout period.
Defines how much time elapses from the time the
system enters Standby mode to the time the system
automatically enters Suspend Mode.
Fn-Power/Sleep key combination puts the system into Save to
Using the BIOS Setup Utility 3-13