NEC VERSA VX Manual page 114
Hide thumbs
Also See for VERSA VX:
- Release note (10 pages) ,
- Using manual (4 pages) ,
- Service and reference manual (106 pages)
Table of Contents
Advertisement
Note
You can connect your system to the NEC Port Replicator with the system
powered off. In Plug-and-Play operating systems such as Windows 95, you can also
connect your system to the NEC Port Replicator with the system in Suspend mode.
2.
Push the docking lever on the right side of the NEC Port Replicator towards the
rear of the replicator.
3.
Open the port cover on the rear of the NEC Versa. Remove the expansion port
cover by pulling it out of its slot in the port cover. Close the port cover.
Removing the expansion port cover
Locating the docking lever
A – Docking Lever
A – Expansion Port Cover
Using External Devices 8-9
Advertisement
Table of Contents
