Removing the Coin-Cell Battery
1 Follow the procedures in "Before You Begin" on page 127.
2 Turn the computer over and loosen the three captive screws along with the
M2.5 x 5-mm screw. Remove the module cover.
3 Disconnect the coin-cell battery cable from the system board.
1
4 Slide the coin-cell battery from under the antenna cables and remove the
battery from the computer.
Replacing the Coin-Cell Battery
1 Connect the coin-cell battery cable to the system board.
2 Slide the coin-cell battery into its storage location under the antenna
cables.
3 Replace the module cover.
1
coin-cell battery
2
2
cable connector
Adding and Replacing Parts
153