3
4
5
1
3
5
5 Pull up on the plastic bar that secures the keyboard cable to the system
board and remove the keyboard
Replacing the Keyboard
1 Slide the keyboard connector into the slot until it clicks and pull down on
the plastic bar that secures the keyboard connector to the system board.
2 Align the five tabs along the bottom of the keyboard and slide them under
the palm rest.
NOTICE:
consuming to replace. Be careful when removing and handling the keyboard.
3 Replace the two M2 x 2-mm screws along the top of the keyboard.
136
Adding and Replacing Parts
1
2
M2 x 2-mm screw (2)
keyboard tabs (5)
plastic securing bar
The keycaps on the keyboard are fragile, easily dislodged, and time-
2
keyboard
4
keyboard cable