Security Menu
Use the Security menu to configure your system for protection against
unauthorized access.
Parameter
Supervisor Password Is:
User Password Is:
Change Supervisor Password
Change User Password
Boot Password Required
Set Master HDDs Security
Password*
Set User HDDs Security
Password
*
Display of Set Master HDDs Security parameter requires Supervisor
Password enabled.
Supervisor Password Is — Display only. Automatically displays
password status.
User Password Is — Display only. Automatically displays
password status.
Change Supervisor Password — Allows you to set or change the
Supervisor password. The Supervisor password allows access to all
Setup items.
Change User Password — Allows you to set or change the User
password. The User password allows limited access to Setup items.
To enter a User password, a Supervisor password must be enabled.
Boot Password Required — If set to Yes, requires a password on
system startup.
3-8 Using the BIOS Setup Utility
System Security Setup
Default Setting
Not Installed
Not Installed
Press Enter
Press Enter
No
Press Enter
Press Enter
Alternate
Setting(s)
(automatically
detected)
(automatically
detected)
Yes