Partition Only Restore - NEC VERSA LITEPAD TABLET PC Manual

Partition Only Restore

If your preinstalled software on drive C: of your multiple-partitioned
drive becomes unusable and you cannot boot from the hard disk, use
the Product Recovery utility to restore your primary partition to its
initial shipping configuration.
your hard disk drive consists of multiple partitions and if drive C:
contains the operating system and related drivers. Move all other data
and applications to other partitions (drives) or the Partition Only restore
process will erase them completely.
The Partition Only restore option deletes all files on drive C: and
replaces them with the original factory installed files. Only use the
Partition Only restore option if the preinstalled software on drive C: is
unusable.
Use the Product Recovery utility to perform a Partition Only restore as
follows:
Check the Product Recovery CD title and make sure that it is the
1.
correct CD for your NEC Versa LitePad tablet PC and operating
system.
Put CD1 into the CD-ROM drive tray, close the drive door, and
2.
reboot your computer.
Read the License Agreement screen that appears. Use the
3.
keyboard or mouse to accept or decline the agreement. If you
decline the agreement, the recovery utility exits.
In the NEC Product Recovery utility screen, select Partition Only
4.
to restore drive C: of a multiple partitioned drive to its original
factory installed state.
prevent losing data and applications installed on your system.
If the hard disk is configured with multiple or extended partitions you
may have to reinstall some software to restore configuration settings
and shared files.
4-14 Using the Operating System and Utilities
Use the Partition Only restore option only if
Choose your restore option carefully to