Cable Connections; Connecting The Ac Adapter - NEC VERSA LITEPAD TABLET PC Manual

Cable Connections

To run your tablet PC on AC power and to charge the installed battery,
connect the AC adapter.
pack before running the tablet PC on battery power. See the following
section, "Connecting the AC Adapter," to charge the battery.
To use your tablet PC as a full-featured PC, connect the AC adapter,
USB keyboard, mouse, and CD-ROM drive that come with the system.
See the following sections for connection information.

Connecting the AC Adapter

Connect the AC adapter and power cable that come with your tablet
PC to run your system when an AC outlet is available.
Note
connected, the AC adapter charges the battery pack, whether the tablet
PC is powered on or off.
Connect the AC adapter as follows.
Connect the AC adapter cable to the tablet PC power port.
1.
Plug one end of the AC power cable into the AC adapter and the
2.
other end into a properly grounded 120- or 240-volt, 50- or 60-Hz
wall outlet.
2-16 Getting Started
To prevent data loss, fully charge the battery
Keep the AC adapter connected whenever possible. When