Cf Cards; Inserting A Cf Card - NEC VERSA LITEPAD TABLET PC Manual

CF Cards

The NEC Versa LitePad tablet PC supports one Type I or one high-
capacity Type II CompactFlash (CF) Card for extending system
storage capabilities. The CF Cards have a standard 50-pin connector.
Type I cards are 3.3 mm thick and Type II cards are 5 mm thick.
The system integrates one CF Card slot on the right side of the tablet
PC. Use the slot to insert one Type I or one Type II CF Card.

Inserting a CF Card

To insert a CF Card, follow these steps.
Remove the CF Card slot cover by pressing twice on the eject
1.
button next to the slot. Pull the cover out of the slot and save it.
A – CF Card Eject Button
Align the CF Card so that the connector end points toward the CF
2.
Card slot and the printed label side is up.
Insert the CF Card into the slot.
3.
Follow the CF Card manufacturer's instructions for using the card.
4.
5-12 Adding Expansion Devices
CF card slot cover
B – CF Card Slot Cover