NEC VERSA LITEPAD TABLET PC Manual page 113

4. Install the new memory module as follows.
Locate the alignment notch on the module.
Align the notch with the key in the slot connector.
Holding the memory module at a 40-degree angle to the
socket, insert the module connector into the socket. Firmly
push the module into the socket.
Press down on the edge of the memory module until the
locking tabs on the sides of the socket snap into place,
securing the module.
Installing the memory module
A – Module Alignment Notch
Replace the memory bay cover and its screw.
5.
Turn the system over. Reinstall the battery pack and reconnect the
6.
peripherals and the AC adapter power cable.
Adding Expansion Devices 5-11