Usb Cd-Rom And Cd-R/Rw Drives - NEC VERSA LITEPAD TABLET PC Manual

To connect and use the USB diskette drive, follow these steps.
Connect the USB cable attached to the drive to the USB port on
1.
your NEC Versa LitePad tablet PC. Tablet PC power can be on or
off when connecting the cable.
Turn on tablet PC power, if it is not already on.
2.
If this is the first time the USB diskette drive is connected, a New
Hardware Found message displays on your screen and a hardware
driver automatically installs for your drive.
3. Insert a diskette in the drive, until it locks in place.
To eject the diskette, press the eject button. Before ejecting the
diskette, be sure that the status LED is not lit.
from the system with Windows XP running, use the Safely Remove
Hardware function on the Windows XP taskbar.

USB CD-ROM and CD-R/RW Drives

A USB CD-ROM drive comes with your NEC Versa LitePad tablet
PC. The USB CD-R/RW drive is an optional device.
Use the USB CD-ROM and CD-R/RW drives to load and start
programs from a compact disc (CD) or to play your audio CDs. These
drives are fully compatible with Kodak™ multisession Photo CD™
discs and standard audio CDs.
The Easy CD Creator™ application comes with the CD-R/RW drive.
Easy CD Creator allows you to write information to a CD and to back
up information from your hard disk drive to a CD. For detailed
information about using the USB CD-R/RW drive and installing the
Easy CD Creator software, refer to the accessory sheet that ships with
the drive.
The USB CD-ROM and CD-R/RW drives are automatically assigned
available drive letters.
Drive features are shown in the following figures (see the descriptions
following the figure).
5-4 Adding Expansion Devices
When you remove the USB diskette drive