Dell XPS PP06XA Owner's Manual page 181

The Boot Order page displays a general list of the bootable devices that may
be installed in your computer, including but not limited to the following:
• Diskette Drive
• Modular bay HDD
• Internal HDD
• Optical Drive
During the boot routine, the computer starts at the top of the list and scans
each enabled device for the operating system start-up files. When the
computer finds the files, it stops searching and starts the operating system.
To control the boot devices, select (highlight) a device by pressing the down-arrow
or up-arrow key, and then enable or disable the device or change its order in
the list.
• To enable or disable a device, highlight the item and press the space bar.
Enabled items appear as white and display a number next to them;
disabled items appear blue or dimmed without a number.
• To reorder a device in the list, highlight the device and then press <u> or
<d>(not case-sensitive) to move the highlighted device up or down.
Boot sequence changes take effect as soon as you save the changes and exit
the system setup program.
Performing a One-Time Boot
You can set a one-time-only boot sequence without entering the system setup
program. (You can also use this procedure to boot the Dell Diagnostics on the
diagnostics utility partition on your hard drive.)
1 Shut down the computer through the Start menu.
2 Connect the computer to an electrical outlet.
181
Appendix