Page 2
IMPORTANT Please read the entire manual carefully before assembling and using your Deco Wall Skyline, and please ensure the manual is kept in a safe place for future reference. Any use or modification to the Deco Wall Skyline not included in this manual shall be considered as improper use, which may cause considerable danger to users and property and will void the product warranty.
TABLE OF CONTENTS - Before Assembling Your Deco Wall Skyline - Important Safety Advice - List of Parts - Assembly - Enjoy Your Deco Wall Skyline - Care & Maintenance - Warranty & Complaints Procedure...
Make sure you have all the tools required for assembling your Deco Wall Skyline In order to assemble your Deco Wall Skyline safely and correctly, please ensure you have access to the following tools and accessories, all of which are not provided.
Page 5
- contact a reliable contractor to install a concrete base if you don't have one Do not assemble the Deco Wall Skyline on sandy, muddy or loose soil, as the stakes do not have the suffcient anchorage to be installed in these...
IMPORTANT SAFETY ADVICE For the safety of all persons assembling and using the Deco Wall Skyline, it is important to follow the safety guidelines below. It is recommended that two people lift Always wear appropriate work shoes, Work well away from power lines, If using power tools or a ladder, the deco wall once assembled.
Page 7
Install on non-Mirador branded Changes to the design or configuration After prolonged use we Please recycle packaging where pergola will void the product of equipment may not be made recommend you check all the possible. warranty and can damage the without consulting the manufacturer or fittings are tightened securely.
LIST OF PARTS PART NAME 3m/10ft. 3.6m/12ft. 4m/13ft. Horizontal top bar Horizontal beam Vertical bar Foot pad Screw ST5.5x50mm Plastic expansion pipe 8x40mm Screw ST4.8x25mm Screw 40+2 46+2 48+2 ST4.2x25mm...
ASSEMBLY 1. Horizontal beam assembly Assembly Video Insert all of the vertical bars into horizontal beams Part \ Length 3m/10ft. 3.6m/12ft. 4m/13ft. Secure the horizontal beams to the vertical bars by tightening the screw clockwise. Part \ Length 3m/10ft. 3.6m/12ft. 4m/13ft.
Page 10
2. Horizontal top bar & foot pad assembly Secure the horizontal top bar to the horizontal beam by tightening the screw clockwise. Notice: Pay attention to the direction of the horizontal top bar while assembled to the horizontal beam Left Middle Right Assemble the foot pads...
Page 11
3. Install the Deco Wall Skyline onto a Mirador pergola ® Position the deco wall (against the pergola pillar or in the middle) , mark the position of the drill holes on the ground with pencil. Remove the wall, drill holes with hammer...
Page 12
Pergola Beam Hook the deco wall onto the beam of the pergola, secure the wall with screw Fix the deco wall to the ground with screw Part \ Length Left/Middle wall Right wall...
CARE & MAINTENANCE Dust and dirt will collect on the deco wall Use a water/detergent mixture and a soft Air dry or wipe with a soft clean cloth. and will require periodic cleaning. clean cloth to clean the deco wall. In coastal areas, it is recommended that you From more soiled areas, rinse the surface Do not use any acidic, alkaline or petroleum...
COMPLAINTS PROCEDURE For terms and conditions of our limited warranty, please visit www.miradoroutdoor.com or contact your local Mirador sales representative. Complaints procedure: • The complaint must include an order number or transaction number. Goods without an order number or transaction number are not covered under the warranty.
Page 16
FOLLOW US ON WWW.MIRADOROUTDOOR.COM @miradoroutdoor @MiradorOutdoor @miradoroutdoor @miradoroutdoor...
Need help?
Do you have a question about the DECO WALL SKYLINE and is the answer not in the manual?
Questions and answers