Table of Contents
Advertisement
Tapping a fingertip against the pad results in a click. Quickly tapping the pad twice
results in a double-click. Tapping the pad to produce a click or double-click is
called "tapping" or "double tapping".
If you tap the pad with the pointer aligned on the target, and then touch the pad
again and move your finger, this operation will result in a drag.
Configuring NX pad
Configuration of the NX pad buttons, pointer behavior, and extended features is
done using the [Mouse Properties] window.
1
Click [Start] and then [Control Panel].
2
Click [Hardware and Sound], and click [Mouse] in [Devices and Printers].
The [Mouse Properties] window should come up.
Click on each tab in the [Mouse Properties] window to change the NX pad
settings.
10
8
Display switch tool
The display switch tool on this computer enables you use the keyboard to redirect
screen output or change the screen resolution.
When you press <Fn> + <F3>, available outputs are displayed as icons on the
screen. Each time <Fn> + <F3> you press, the output changes.
Screen output operations are explained below.
(1)
(2)
(3)
(4)
(1)
Computer's LCD display
(2)
External display or television connected to the HDMI port
(3)
Clone mode using the computer's LCD display and the external display or
television connected to the HDMI port
(4)
Dual display using the computer's LCD display and the external display or
television connected to the HDMI port (the LCD display is primary)
(5)
Dual display using the computer's LCD display and the external display or
television connected to the HDMI port (the LCD display is secondary)
(6)
External display connected to the external display output
(7)
Clone mode using the computer's LCD display and the external display
connected to the external display output
(8)
Dual display using the computer's LCD display and the external display
connected to the external display output (the LCD display is primary)
(9)
Dual display using the computer's LCD display and the external display
connected to the external display output (the LCD display is secondary)
(5)
(6)
(7)
(8)
(9)
Hide quick links:
Advertisement
Table of Contents
