Network Configuration - NEC SVP SERVER - INSTALLATION SETUP AND Installation And Setup Manual

4-4 Configuring the SVP Server

Network Configuration

REFERENCE
Figure 4-2 Network Configuration window
CAUTION
The IP address and other network settings are established via the
Network Configuration window. This is also where you may optionally
establish a hostname and enter the IP address of the location of any
software updates you may obtain from NEC Business Solutions.
Use the following steps to complete the configuration options on the
Network Configuration Menu.
Refer to Chapter 6, "Configuring the SVP Server"
software updates via TFTP.
Select Network Configuration on the Netlink SVP-II System Menu
Step 1
window (Figure 4-1 on page 4-2)
Configuration window displays
Enter the IP address of the SVP Server, defined by your network
Step 2
administrator in the IP Address field. Enter the complete address
including digits and periods. DHCP may be entered.
A "master" SVP Server must have a static IP address.
SVP Server Installation, Setup, & Maintenance Manual - Revision 1
for more information about installing
and press ENTER. The Network
(Figure 4-2).