Selecting Cd Restore Options; Restore Individual Files; System Recovery - NEC POWERMATE PROFESSIONAL PII User Manual

Selecting CD Restore options

The following guidelines should help you decide which CD
Restore procedures you should use.

Restore Individual Files

This option lets you select the files and directories you want
restored from the CD Restore compact disc. Use this option
to:
T
restore only a few files
T
control which files and directories are restored to their
factory state.
You can use this option for restoring AUTOEXEC,
CONFIG, and INI files.
This procedure runs in Windows 95. You'll need to boot the
system from the hard disk, enter Windows, and insert the
CD into the CD-ROM reader.

System Recovery

Use this option as a last resort when your preinstalled
software becomes unusable or you can't reboot from the
hard disk. This option requires booting from the CD.
The System Recovery option
T
provides a full system recovery. This means you'll be
able to restore your system to its original factory-
shipped state.
T
reformats hard drive C and erases all information on
the disk.
T
then restores files on drive C from the CD Restore disc.
4-42 NEC Drivers and Utilities