To Originate A Call Using One-Touch Buttons; Automatic Idle Return - NEC NEAX 2000 IPS User Manual

TO ORIGINATE A CALL USING ONE-TOUCH BUTTONS

NOTE: With DTP-32D
Press desired
Call.
To program:
NOTE: (Available only on Dterm stations with speed calling
keys.)
Press Conf button.
Press desired
button LED lights steady.
Enter desired station number, feature
code or outside access code and telephone number. Display
indicates digits dialed.
Press Conf again to save the number.
To verify:
Press Conf button.
Press desired
Display indicates digits programmed.
NOTE: When a station number is programmed on a one touch
button, the associated LED Light will light when that station is
in use. (Available for 32D terminals only).

AUTOMATIC IDLE RETURN

Press Speaker
Dial desired number.
When called party answers, converse.
When called party hangs up, your D
idle.
-- OR --
Press One Touch
10
Speed Call button, or press
Conf flashes
One-Touch button, Speaker
One Touch button.
key. Receive dial tone.
key.
Speaker and
term
automatically returns to
Speed