TERMINAL SETUP WITH THE FEATURE KEY
Microphone On/Off
The MIC lamp shows the status of the built-in microphone.
To change microphone status:
Press Soft Key associated with the MIC Display or press
Feature
and 1.
To select ringer tone
The Dterm Series i has 14 ringer tones that you
can select.
Press
Feature
number (n=1 ~ 14).
To adjust ringer tone
NOTE: Access to feature is based on data assignment.
Press
Feature
Press 3. The LCD displays the selected
tone number (n=1~14).
Press 3. Next tone is selected.
8
and 3. The LCD displays the selected tone
and 0. Ringer activates.