LOGIN OPERATION (Dterm IP only)
(1) Automatic Login Mode (Authentication by MAC Address)
When starting up the Dterm IP, the LCD
displays the login screen.
Enter the Station Number of the Dterm IP following "LOGIN:"
Press the
Set
Press the
OK
After the first registration, Login operation is not required.
Note:
(2) Protected Login Mode
When starting up the Dterm IP, the LCD
displays the login screen.
Enter the Station Number of the Dterm IP following "LOGIN:"
Press the
Set
Enter the password for initial setup following "PASSWD:"
Press the
OK
LOGOUT OPERATION (Dterm IP only)
Go off-hook or press the Speaker Key. Receive Dial Tone.
Dial the Logout Feature Access Code or press the Logout
Feature Access Key or Logout Soft Key. Receive Service Set
Tone.
The LCD displays the login screen.
soft key.
soft key. The time and date appear on the LCD.
soft key.
soft key. The time and date appear on the LCD.
LOGIN:
PASSWD:
CANCEL BK SET
OK
LOGIN:
PASSWD:
CANCEL BK SET
OK
7