NEC ELITEMAIL FMS-VMS Manual page 22

L
i v e M o n i t o r i n g
Live monitoring allows you to hear a message through the speaker of your phone as
the message is being left by an outside caller. Only one call is monitored at a time,
and live monitoring is available only when your phone is idle. New outside calls
received during a live monitoring session are sent to your voice mailbox.
E L
N A B L E I V E
Press Live Monitor Feature Access key.
Dial station password. (Same as station lockout (password) code).
Once Live Monitor is set the corresponding LED lights red.
NOTE: By default, password is set at 0000000000 (10 zeros).
L M
I V E O N I T O R
A live monitoring session starts as an outside caller begins leaving a message for
you. To be connected to the caller anytime during the live monitoring session,
pick up the handset or press Speaker.
When you connect to the caller during a live monitoring session, the portion of
the message that was recorded before you connected is saved as a voice message
in your mailbox.
P
r o g r a m m i n g L i v e R e c o r d F u n c t i o n K e y s
F A
E A T U R E C C E S S
Press Feature.
Press Redial.
Press Feature Access key to
be programmed.
Dial 2.
Dial Function Code (see next page).
Press Feature.
NOTE: Refer to the Electra Elite Multiline Telephone User Guide for additional information on
programming Feature Access keys and One Touch keys.
M
O N I T O R
A C
O N V E R S A T I O N
K
E Y S
O T
N E O U C H
Press Feature.
Press Redial.
Press One Touch key to be
be programmed.
Dial 2.
Dial Function Code (see next page).
Press Feature.
K
E Y S
18