| Monitoring the Switch
C
5
HAPTER
Displaying the MAC Address Table
D
MAC A
ISPLAYING THE
Age-Outs – Each LLDP frame contains information about how long the
◆
LLDP information is valid (age-out time). If no new LLDP frame is
received within the age-out time, the LLDP information is removed, and
the Age-Out counter is incremented.
W
I
EB
NTERFACE
To display statistics on LLDP global counters and control frames, click
Monitor, LLDP, Port Statistics.
Figure 124: LLDP Port Statistics
T
DDRESS
ABLE
Use the MAC Address Table to display dynamic and static address entries
associated with the CPU and each port.
P
ATH
Monitor, MAC Address Table
P
ARAMETERS
These parameters are displayed:
Start from VLAN # and MAC address # with # entries per page –
◆
These input fields allow you to select the starting point in the table.
Type – Indicates whether the entry is static or dynamic. Dynamic MAC
◆
addresses are learned by monitoring the source address for traffic
entering the switch. To configure static addresses, refer to
the MAC Address Table" on page
VLAN – The VLAN containing this entry.
◆
– 246 –
155.
"Configuring