| Monitoring the Switch
C
5
HAPTER
Displaying Information About MAC-based VLANs
D
I
ISPLAYING
NFORMATION
A
MAC-
BOUT
BASED
Use the MAC-based VLAN Membership Configuration page to display the
MAC address to VLAN map entries.
P
ATH
Monitor, VCL, MAC-based VLAN
P
ARAMETERS
These parameters are displayed:
MAC-based VLAN User – A user or software module that uses VLAN
◆
management services to configure MAC-based VLAN membership. This
switch supports the following VLAN user modules:
Static: MAC addresses statically assigned to a VLAN and member
■
port through the CLI, Web or SNMP.
NAS: Provides port-based authentication, which involves
■
communications between a Supplicant, Authenticator, and an
Authentication Server.
Combined: Includes all entries.
■
MAC Address – A source MAC address which is mapped to a specific
◆
VLAN.
VLAN ID – VLAN to which ingress traffic matching the specified source
◆
MAC address is forwarded.
◆
Port Members – The ports assigned to this VLAN.
W
I
EB
NTERFACE
To display MAC-based VLAN membership settings, click Monitor, VCL,
1.
MAC-based VLAN.
Select a software module from the drop-down list on the right side of
2.
the page.
Figure 128: Showing MAC-based VLAN Configuration
– 250 –
VLAN
S