Troubleshooting; Diagnosing Switch Indicators; Table A-1 Troubleshooting Chart - SMC Networks 8708L2 Installation Manual

Diagnosing Switch Indicators

Symptom
PWR LED is Off
PWR LED is Yellow
Diag LED is Yellow
Link LED is Off
T
ROUBLESHOOTING

Table A-1 Troubleshooting Chart

Action
• Check connections between the switch, the power
cord, and the wall outlet.
• Contact SMC Technical Support.
• Internal power supply has failed. Contact your local
dealer for assistance.
• Power cycle the switch to try and clear the condition.
• If the condition does not clear, contact your local
dealer for assistance.
• Verify that the switch and attached device are powered
on.
• Be sure the cable is plugged into both the switch and
corresponding device.
• Verify that the proper cable type is used and its length
does not exceed specified limits.
• Check the adapter on the attached device and cable
connections for possible defects. Replace the defective
adapter or cable if necessary.
A
PPENDIX
A
A-1