Using The Barricade's Storage - SMC Networks 7208SBR User Manual

Changing your Barricade Password

DGPLQ
$GPLQLVWUDWRU

Using the Barricade's Storage

Once the Barricade Administrator has given you a valid User Name on the Barri-
cade, you can use the following procedure to change your password.
1. Start your WEB browser
2. In the Address box, enter:
HTTP://ip_address/user.pl
Where ip_address is the IP Address of the Barricade.
e.g.
HTTP://192.168.123.254/user.pl
If you do not know the IP Address of the Barricade, ask the Barricade adminis-
trator.
3. You will be prompted for your name and password. Enter your existing user
name and password.
4. On the next screen, enter your new password.
5. Save, then close your Browser.
To use the Barricade's storage, you should "Map" a drive letter to each folder on the
Barricade folder which you wish to access. The "Network Drive" will then be avail-
able to all Windows programs. The procedure is as follows:
1. Double-click the Network Neighborhood icon on the desktop.
2. On the "View" menu, select Details. The Comment column will now be visible.
3. Locate the Barricade, as shown below. If it is not listed, double-click Entire
Network. Then double-click the Workgroup that the Barricade is in. (By default,
the Barricade is in Workgroup.)
Figure 14: Network Browse
Page 33