Table of Contents
Advertisement
Network Logon
Page 32
To use the Barricade, you must Logon to the Network correctly:
1. Check your Window logon using Start - Settings - Control Panel - Network.
Ensure the Primary Network Logon is set to Client for Microsoft Networks, as
shown below.
Note: If this is already set, there is no need to make any changes.
2. Windows will prompt you to Logon to the Network when it boots.
You must logon. If you press ESC, or click Cancel, no network resources will
be available. When you logon, you need to use a valid User Name and Pass-
word.
If the Barricade Administrator has defined users on the Barricade, use the
User Name and password they supply.
If you use a User Name and password which is not recognized by the Bar-
ricade, you can still use it, with guest access rights. By default, this allows
read/write access to the "public" share, but the Administrator can set the
guest access rights as they wish.
Figure 13: Window Logon
Advertisement
Table of Contents
