Windows Client Setup; Overview; Tcp/Ip Setup - SMC Networks 7208SBR User Manual



Overview

TCP/IP Setup

Supported versions of Windows are:
Windows 95/98/ME or later
Windows NT 4.0 or Windows 2000
The following items need to be checked or configured:
TCP/IP protocol.
Network Logon
Mapping to the Barricade's storage.
Network Printer installation for the Barricade's printer.
Internet Access configuration.
The sample screens shown are from Windows 98. Other versions of Windows are
similar but not identical.
1. Select the Control Panel - Network option on the Start Menu. You should see a
screen like the one following.
2. If a line like the one highlighted (TCP/IP -> Network card) is not listed, then
you need to install the TCP/IP protocol by selecting Add - Protocol - Microsoft
- TCP/IP - OK.
Figure 10: Network Configuration
Page 29