I
NSTALLING THE
Wiring Map for Serial Cable
Switch's 9-Pin
Serial Port
2 RXD (receive data)
3 TXD (transmit data)
5 SGND (signal ground)
No other pins are used.
The serial port's configuration requirements are as follows:
•
Default Baud rate—9,600 bps
•
Character Size—8 Characters
•
Parity—None
•
Stop bit—One
•
Data bits—8
3-12
S
WITCH
Table 3-1 Serial Cable Wiring
Null Modem
<----------------------------
---------------------------->
------------------------------
PC's 9-Pin
DTE Port
3 TXD (transmit data)
2 RXD (receive data)
5 SGND (signal ground)