Stack Master Button; Mode Poe/Link Button; Figure 1-4 Stack Master Button; Figure 1-5 Mode Selection - SMC Networks 6824MPE INT - annexe 1 Installation Manual

A T
BOUT THE IGER

Stack Master Button

The unit also includes a Stack Master button, as shown in the following
diagram.
Slave
Master
Stack Master Button
The Stack Master button enables one switch in the stack to be selected as the
master.

Mode PoE/Link Button

The Mode PoE/Link button is located on the front panel.
The Mode PoE/Link button is used to toggle between the two port status
LED display modes (see "Port and System Status LEDs" on page 1-5).
Pressing this button changes from one display mode to the other. The
default display mode is Link/Act mode.
1-8
S III 10/100
TACK

Figure 1-4 Stack Master Button

Figure 1-5 Mode Selection

Console
Mode Select Button
Link/Act PWR
PoE Diag
25
26 Stacking
Mode
PoE/Link