Removing The Vga/Serial Door; Replacing The Vga/Serial Door; Removing The Vga Panel Cover - Dell LATITUDE E6400 XFR Service Manual

39.9 Removing the VGA/Serial Door

1. Follow the procedures in Before Working on Your Computer.
2. Open the door to relieve hinge pressure.
3. Remove the two M3 x 3-mm screws from the bottom of the base assembly.
39.10

Replacing the VGA/Serial Door

1. Insert door hinge onto assembly and align the hinge divots.
2. Replace the two M3 x 3-mm screws.
Follow the procedures in After Working on Your Computer.
39.11

Removing the VGA Panel Cover

1. Follow the procedures in Before Working on Your Computer.
2. Open the VGA door.
Page 72
™
Dell Latitude™ E6420 XFR Service Manual