Virtualization Support - Dell LATITUDE E6400 XFR Service Manual

Numlock
Fn Key Emulation
POST HotKeys
Fastboot

Virtualization Support

Option
Virtualization
VT for Direct I/O
Trusted Execution
Wireless
Option
Wireless Switch
Wireless Device Enable
Maintenance
Option
Service Tag
Asset Tag
Page 79
™
Dell Latitude™ E6420 XFR Service Manual
• Touchpad/PS-2 Mouse
Default Setting: Touchpad/PS-2 Mouse
Enable Allows you to enable the Numlock option when the computer boots.
Default Setting: Enable Numlock is selected.
Allows you to set the option where the <Scroll Lock> key is used to simulate the
<Fn> key feature.
Default Setting: Enable Fn Key Emulation is selected.
Allows you enable the sign-on screen message display indicating the keystroke
sequence to access the System Setup option menu.
Default Setting: Enable F12 Boot Option Menu is selected.
Allows to set the option to speed up the boot process. The options are:
• Minimal
• Thorough
• Auto
Default Setting: Thorough
Description
Allows you to enable or disable the Intel Virtualization Technology.
Default Setting: Enable Intel Virtualization Technology is selected.
Allows you to enable or disable Virtualization Technology for Direct I/O.
Default Setting: Disabled is selected.
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can
utilize the additional hardware capabilities provided by Intel Trusted Execution
Technology. The TPM Virtualization Technology and Virtualization Technology
for Direct I/O must be enabled to use this feature.
Default Setting: Disabled is selected.
Description
Allows you to set the wireless devices that can be controlled by the wireless switch.
The options are:
• WWAN
• WLAB
• Bluetooth
Default Setting: All the options are selected.
Allows you to enable or disable the wireless devices.
Default Setting: All the options are selected.
Description
Displays the Service Tag of your computer.
NOTE: If a Service Tag has not been set for this system, the computer will
automatically bring up this screen when users enter the BIOS. You will be
prompted to enter the Service Tag.
Displays the Asset Tag.