Replacing The Hdmi/Esata Door; Removing The Battery Door; Replacing The Battery Door - Dell LATITUDE E6400 XFR Service Manual

39.4 Replacing the HDMI/eSATA Door

1. Insert door hinge onto assembly and align the hinge divots.
2. Replace the two M3 x 3-mm screws.
3. Follow the procedures in After Working on Your Computer.

39.5 Removing the Battery Door

NOTE: Removal of the battery door requires a security screw driver with a triangle head. These are available with the
battery door kit.
1. Follow the procedures in Before Working on Your Computer.
2. Open the door to relieve hinge pressure.
3. Remove the four M3 x 3-mm screws from the bottom of the base assembly.

39.6 Replacing the Battery Door

1. Insert door hinge onto assembly and align the hinge divots.
2. Replace the four M3 x 3-mm triangle security screws.
3. Follow the procedures in After Working on Your Computer.
Page 70
™
Dell Latitude™ E6420 XFR Service Manual