Display Assembly; Removing The Display Assembly - Dell LATITUDE E6400 XFR Service Manual

22 Display Assembly

22.1 Removing the Display Assembly

CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Follow the instructions in Before Working on Your Computer.
2. Remove the bottom access panel (see Removing the Bottom Access Panel).
3. Remove the display cable channel covers (see Removing the Display Cable Channel Covers).
4. Disconnect and unroute the antenna cables from the RF passthru, WLAN, WWAN, or WPAN if present.
5. Remove the two M2x3 mm secrews securing the LVDS bracket to the base assembly.
Page 40
™
Dell Latitude™ E6420 XFR Service Manual