Usb Board; Removing The Usb Board Assembly - Dell LATITUDE E6400 XFR Service Manual

30 USB Board

30.1 Removing the USB Board Assembly

CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Follow the instructions in Before Working on Your Computer.
2. Remove the palm rest (see Removing the Palm rest).
3. Remove the Media Board (see Removing the Media Board)
4. Disconnect the USB cable from the USB Board (J10), as show below.
5. Remove the one M2.5x5 mm scres securing the media board bracket to the chassis. Remove the media board
bracket.
6. Remove two M2 x 3-mm screws securing the USB board to the chassis.
Page 56
™
Dell Latitude™ E6420 XFR Service Manual