Installing The Usb Board; Removing The Vga Board - Dell PP50F Owner's Manual

Installing the USB board

1 Place the USB board into the slot on the computer.
2 Tighten the screw to secure the USB board to the computer.
3 Connect the USB board cable to the connector on the USB board.
4 Install the:
a palmrest
b keyboard
c hard drive assembly
d base cover
e battery
5 Follow the procedure in

Removing the VGA board

1 Follow the procedure in
2 Remove the:
a battery
b base cover
c hard drive assembly
d keyboard
e palmrest
3 To remove the VGA board:
a Remove the screw that secures the VGA board to the computer [1].
b Lift the latch and disconnect the VGA board cable from the connector on the VGA board [2, 3].
c Lift and remove the VGA board from the computer [4]
16 Removing and installing components
After Working Inside Your computer.
Before Working Inside Your Computer.