Removing The Vga Connector Board; Replacing The Vga Connector Board - Dell Inspiron N3010 Service Manual

Back to Contents Page
VGA Connector Board
Dell™ Inspiron™ N3010 Service Manual
Removing the VGA Connector Board
Replacing the VGA Connector Board
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
is not covered by your warranty.
CAUTION:
computer.
Removing the VGA Connector Board
1. Follow the instructions in
2. Remove the battery (see
3. Remove the memory-module cover (see
4. Remove the memory module(s) (see
5. Remove the keyboard (see
6. Remove the palm rest assembly (see
7. Remove the display assembly (see
8. Remove the middle cover (see
9. Lift the connector latch and pull the pull-tab to disconnect the VGA connector cable from the connector on the system board.
10. Remove the two screws that secure the VGA connector board to the computer base.
1 screws (2)
3 VGA connector cable
11. Lift the VGA connector board off the computer base.
Replacing the VGA Connector Board
1. Follow the instructions in
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
Removing the Memory-Module
Removing the Memory
Removing the Keyboard).
Removing the Palm Rest
Removing the Display
Removing the Middle
2 VGA connector board
Before You Begin.
UserManuals.info
Removing the
Cover).
Module(s)).
Assembly).
Assembly).
Cover).
Battery) before working inside the