Programmed Edit Recording - Aiwa XR-MT1000 Operating Instructions Manual

l------k -----
1
-—
-C3'55
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape as the tracks are programmed,
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded on from the beginning of
either side.
1
2
3
4
5
Ilnsert the tape into deck 2, and press DOLBY NR
to
turn Dolby NR on or off.
Insert the tape with the side to be recorded on first facing out
from the unit.
lPress CD on the stereo receiver and
load the
(disc(s).
lPress EDIT/CHECK on the remote control twice.
"EDIT" and "PRGM" are highlighted.
C, W hen "AI" is highlighted, press EDIT/CHECK again.
lPress the numbered buttons on the remote
(control to designate the tape length.
'1 O to 99 minutes can be specified,
,, The +, ~ is also available to designate the tape length.
6
7
8
Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
Press EDIT/CHECK on the remote control to
select side B and program the tracks for side B.
After confirming "b on the display, repeat step 5.
Press REC/REC MUTE to start recording.
The tape is rewound to the beginning of the front side, the
lead segment is played through for 10 seconds, and recording
starts. When recording on the front side (A) ends, recording
on the back side (B) starts.
To stop recording
Press STOP on the cassette deck or on the CD player (or
CLEAR on the remote control). Recording and CD play stop
simultaneously.
To clear the edit program
Press STOP @ on the CD player (or CLEAFI * on
the remote control) in stop mode so that the highlighted indicator
"EDIT" on the display disappears.
To
check the order of the programmed track numbers
In stop mode, press EDIT/CHECK on the remote control to select
a side, and press + or - on the CD player repeatedly.
Disc number Program number
%
Q
Tape length Maximum recording
time for side A
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press the numbered buttons O-9 and + 10
on the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2, then press +10 and 0,
Remaining Programmed
Track number
time on side A
tracks
m
side of th; tape is broken off.
Program number
Tape side
a: First recording side (side A)
b: Second recording side (side B)
ENGLISH
33